Cleaning and maintaining TPU protective film is actually quite simple. Just remember a few key points to keep it looking as good as new for a long time:
1. Cleaning method
Daily cleaning
Gently wipe with a soft cloth or a dedicated cleaning agent, avoiding corrosive liquids such as alcohol.
When the stain is heavy, dip a small amount of water or a dedicated cleaning agent to wipe it off.
Stubborn stain treatment
Wipe with lacquer thinner or 99% high-concentration alcohol.
Avoid using abrasive or strong chemical cleaners.
II. Maintenance Tips
Avoid damage
Keep away from heat, sharp objects, and chemicals.
Avoid using a high-pressure water jet to wash the edges of the car’s tint within 10 days after the tint is applied.
Regular maintenance
Maintain with a three-in-one maintenance solution every two months.
Nanometer-scale crystal plating products can enhance UV protection.
Special scene
If there are bubbles in the автомобилен филм 10 days after it is applied, you need to find a professional to repair it.
Light scratches can be accelerated for self-repair with a heating lamp.
III. Precautions
Keep the area ventilated during cleaning and avoid direct sunlight.
Avoid washing the car within 10 days after the application of car film.
Regularly check whether the edges are warped and address any issues promptly.
Cleaning TPU film is actually quite simple, and with the right tools, it can be easily accomplished! I’ve prepared this list for you, so you can choose according to your needs:
1. Basic cleaning tools
Soft cloth/microfiber cloth
Used for daily wiping to avoid scratching the film surface.
Soft brush/toothbrush
Clean the dust from the gaps, taking care not to use overly sharp tools.
Mild detergent
Use neutral detergent or dedicated cleaning agent to avoid corroding TPU material.
II. Professional Nursing Tools
TPU dedicated cleaning agent
For example, ABDTDEATKN formula cleaner has good decontamination and polishing effects.
Nursing care set
Includes cleaning agents, towels, etc., suitable for regular maintenance.
III. DIY cleaning solution
Alcohol spray bottle
40% alcohol + 60% distilled water, suitable for stubborn stains.
Dishwashing detergent spray bottle
3 drops of dish washing liquid + distilled water, used for lubrication and preventing bubbles during film application.
IV. Precautions
Avoid letting alcohol wipes come into contact with the lining to prevent oxidation.
When cleaning dark-colored films, avoid using paper towels to prevent leaving paper scraps.
Ventilate and air dry after cleaning. Do not use a hair dryer.
